CN Mould & Plastic Limited

Waterproof Design Studies

01
12, 2025
Core-pulling with sliding block assembly structure in fixed half of two-color mold
Product DescriptionFigure 1-1 shows an assembly drawing of an automotive interior component. This part consists of three sub-components: an upper cover (PP material), a base (PP material), and a TEO c...
24
11, 2025
Two-Shot Mold Structure for Dual-Color Toothbrush
Product DescriptionFigure 1-1 shows a two-color product diagram of a common dual-color toothbrush. The product has an average wall thickness of 3 mm, with local areas reaching 4 mm. Its overall dimens...
18
11, 2025
Two-Shot Mold with Rotating Moving Mold
Product DescriptionFigure 1-1 shows a two-shot product diagram of an internal part for a packaging application. The average wall thickness is 1.25 mm, with overall dimensions of 13.1 mm × 26.8 mm × ...
11
11, 2025
Two-Color Mold: Rotating Moving Half Core II
Product DescriptionFigure 1-1 shows a two-color product diagram of an internal part for a household appliance. The product has an average wall thickness of 1.2mm and overall dimensions of 6.1mm x 18.2...
04
11, 2025
One of the Rotating Moving Mold Cores for Two-Color Molds
Product DescriptionFigure 1-1 shows a two-color product diagram of the internal parts of a household appliance. The product has an average wall thickness of 2.5mm and an overall dimension of ф156mm x...
07
10, 2025
Two-Shot Mold with Fixed-Mold “Blade” Slider Combination Molding
Product DescriptionFigure 1-1 shows a two-shot product diagram of two interior automotive components. The average wall thickness is 2.0 mm, with overall dimensions of 113.7 mm × 299.2 mm × 305.3 mm ...
22
09, 2025
Two-Shot Mold with Fixed-Mold Half Blocks Molding
Product DescriptionFigure 1-1 shows a two-shot product of an internal electronic component. It has an average wall thickness of 1.5 mm and overall dimensions of 31 mm × 42.7 mm × 131 mm. The green s...
17
09, 2025
Two-Shot Mold with Slide and Angled Lifter Combo
Product BreakdownSo, Figure 1-1 shows this two-shot part for some electronics guts. Average wall thickness is 1.5mm, overall size is 2.8mm x 6.9mm x 11.4mm. The green part is the first shot, made of P...
08
09, 2025
Two-Color Mold with Left-Right Half Slides for Molding
Product DescriptionThe diagram in Figure 1-1 shows a two-color daily-use part. Its average wall thickness is 3.5mm, and the outer dimensions are ф76mm x 108mm. The green part is made of the first-col...
04
05, 2024
A Revolutionary Approach to Waterproof Design in Buttons
As technology advances, so does our need for improved functionality and durability in everyday products. One area that has seen significant progress is the field of waterproof design, particularly in ...