Product BreakdownSo, Figure 1-1 shows this two-shot part for some electronics guts. Average wall thickness is 1.5mm, overall size is 2.8mm x 6.9mm x 11.4mm. The green part is the first shot, made of P...
Product DescriptionThe diagram in Figure 1-1 shows a two-color daily-use part. Its average wall thickness is 3.5mm, and the outer dimensions are ф76mm x 108mm. The green part is made of the first-col...
As technology advances, so does our need for improved functionality and durability in everyday products. One area that has seen significant progress is the field of waterproof design, particularly in ...
Waterproof connector is a special connector designed to maintain the normal operation of electrical equipment in the presence of moisture in the environment, they are usually composed of water-resista...
It's known that not all injection parts challenge the technical acumen of the tool maker and molder, but there are some that do. In this article, an actual example of overmolding will be featured ...
From anti-vibration to isolation, dual-shot injection technology has greatly improved today's product performance. It helps the products to achieve soft touch, robust support and durability requir...
English 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
dansk 
Suomi 
Svenska 
norsk 
