In order to improve production efficiency and reduce costs, small plastic parts are often designed as multi-cavity molds. The Runner System in the injection mold refers to the flow channel of the plas...
During the injection molding process, if the gate is improperly located, the injection molding pressure or holding pressure is too large and the product is not ejected smoothly, which will lead to pro...
Mold temperature refers to the surface temperature of the mold cavity in contact with the product. The choice and setting of mold temperature directly affects the filling of molten plastic, the coolin...
Clamping force refers to the locking force applied to the mold by the injection machine to overcome the expansion force of the melt in the mold cavity during injection. When the raw material is inject...
Precision and attention to detail remain paramount in ensuring the highest quality products. One such process that demands meticulous care is mold surface polishing – an art form that transforms roug...
Electrical Discharge Machining (EDM) is a method used to make metal molds. In order to improve processing efficiency and quality, the following are some suggested tips:1. Choose the right electrode an...
Pitting is a form of corrosion that concentrates on a small area of the metal surface and penetrates deep into the metal.Pitting is generally small in diameter and deep in depth.The ratio of the maxim...
Before the birth of 3D printing technology, the manufacturing industry around the world is based on molds as the main production.In the past few decades, the mold has made great contributions to the p...
When two metals with different potentials are in contact with each other and immersed in the electrolyte, it can be found that the corrosion rate of the metal with a negative potential is increased, w...
Hot Runner System is an injection mold technology that uses heat to keep the plastic in the runner in a molten state. In a hot runner system, heating rods and tube heaters are set near or in the cent...
English 
français 
Deutsch 
Español 
italiano 
русский 
português 
العربية 
dansk 
Suomi 
Svenska 
norsk 
